These glands are suitable for all types of SWA cable, providing environmental seal on both the cable inner and outer sheaths. These are manufactured out of brass castings and are machined accurately to the required sizes These glands are nickel plated to avoid corrosion while storage and use. The following pages on Control and Instrumentation. For those who want to delve further into the world of wiring and electrical installations in hazardous areas, then the following may be of interest:. Shortened lifetime for the glands and the cable entries can result if incompatible materials are selected.
|Date Added:||3 November 2004|
|File Size:||34.52 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
These are nickel plated to avoid corrosion whilst storage and use. Braco black Polyvinyl chloride PVC shrouds are used for fitting over cable glands cablr additional protection against generous weather conditions and corrosion is required. Please Enter number only.
Cable Gland Sizing Chart
These glands provide mechanical cable retention, and electrical continuity via armour wire ttermination. Shortened lifetime ssize the glands and the cable entries can result if incompatible materials are selected.
Single Compression Brass Cable Glands. Braco A2 type brass cable glands are as per BS Part 1: For clearance hole entry situations it is essential to obtain direct metal-tometal contact between the gland, earth tag and the enclosure. These glands are suitable for armoured calbes and are called mechanical glands hence suitable for outdoor application. Braco Flange Type Cable Glands are made out of brass castings and are machined accurately to the required sizes.
PVC shrouds also enhance the IP rating of a termination.
Electrical continuity is normally achieved via the screwed entry into metal boxes. These glands are suitable for all types of SWA cable, yland environmental seal on both the cable inner and outer sheaths. What is a Barrier Gland? Ingress Protection IP Ratings.
Shrouds may be used for ingress protection. Gable Gland Sizing A rough gland sizing table is provided below, however reference should be made to the British Standard referenced above.
There are various options to consider, however if the hazardous gas require IIC apparatus, or if the volume of the enclosure is greater than 2 litres then it is likely you will need to use a barrier gland. Braco E1w type brass glands are as per BS part I: A cable gland is a mechanical device used to securely attach the end of a cable to an instrument, junction box, or piece of equipment.
These xhart used to ensure earth continuity between the gland and the equipment. IIC apparatus is generally associated with Hydrogen.
The following pages on Control and Instrumentation. Braco gland kits contain all that is necessary for terminating a cable run Gland sEarth tag slocknut s and shroud s.
Selecting Cable Glands Items to consider when selecting a cable gland for a particular installation include: These glands provide outer seal joint and are suitable for indoor as well as outdoor applications.
Please Enter Mobile No. Where the enclosure wall thickness is less than 6mm a sealing washer or ccable sealant will tland required to maintain IP54 protection - To maintain earth continuity between a piece of equipment and any armouring in the cable - To ensure containment of an internal explosion in flameproof equipment - To provide strain relief for the cable.
These are manufactured out of brass castings and are machined accurately to the required sizes These glanr are nickel plated to avoid corrosion while storage and use.
Nylon Cable Glands
The outer seal grips sheath. See our page on IP ratings. Flange Type Brass Cable Glands. They provide an effective seal onto both gland and cable oversheath as well as fast and simple installation.
The kits are easier to stock than loose pieces. For those who want to delve further into the world of wiring and electrical installations in hazardous areas, then the following may be glwnd interest:.